Wooden Biltmore Stick – B.C. Forest Service measures approximately 90 cm in length and is in good condition. The words “25 INCH REACH BILTMORE B.C. FOREST SERVICE” are burned into the wood. The stick also features a symbol consisting of two diamonds, one inside the other. The words “SMITH MARKING VAN. B.C.” surround the inner diamond, which contains the words “UNION MADE.” This Biltmore stick was manufactured in Vancouver.
A Biltmore stick, also known as a cruiser or scaling stick, is a forestry measuring tool used to estimate tree diameter and height.
📐 25-Inch Reach
The stick uses mathematical calibrations based on the principle of similar triangles. To measure tree diameter accurately, the stick must be held horizontally against the tree trunk, exactly 25 inches from the user’s eye.
Tree Diameter
Foresters use the stick to estimate a tree’s diameter at breast height (DBH), measured 4.5 feet above the ground. By aligning the zero end of the stick with one edge of the tree and sighting across to the opposite edge without moving their head, they can read the approximate diameter directly from the scale.
Tree Height and Log Scale
Biltmore sticks are often paired with a Merritt Hypsometer scale on the reverse side. By standing a set distance from the tree, typically 66 feet (one chain), and holding the stick vertically, a forester can estimate the number of usable 16-foot logs in the tree.
Historical Background
The Biltmore stick takes its name from the Biltmore Forest School, established in the 1890s. It provided foresters with a practical way to estimate tree measurements without the need for heavy equipment.